Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/70368
Or use following links to share this resource in social networks: Recommend this item
Title Вплив надроторних елементів шнеку на кавітаційно-ерозійні якості шнекововідцентрового ступеня насоса
Authors Ткач, П.Ю.
ORCID
Keywords шнекововідцентровий ступінь
надроторні елементи
кавітаційно-ерозійна характеристика
фізична модель течії
рекомендації до проектування
шнековоцентробежная степень
надроторные элементы
кавитационно-эрозионная характеристика
физическая модель течения
рекомендации к проектированию
inducer centrifugal stage
inducer bush
cavitation erosion characteristic
physical flow
guidance to design
Type Synopsis
Date of Issue 2018
URI http://essuir.sumdu.edu.ua/handle/123456789/70368
Publisher Сумський державний університет
License
Citation Ткач, П.Ю. Вплив надроторних елементів шнеку на кавітаційно-ерозійні якості шнекововідцентрового ступеня насоса [Текст]: автореферат ... канд. техн. наук, спец.: 05.05.17 – гідравлічні машини та гідропневмоагрегати / П.Ю. Ткач. - Суми: СумДУ, 2018. - 20 с.
Abstract У дисертаційній роботі вирішена актуальна науково-технічна задача – підвищення кавітаційно-ерозійних якостей шнекововідцентрового ступеня за допомогою надроторних елементів шнеку. Наведено результати дослідження робочого процесу шнекововідцентрового ступеня з надроторними елементами, а також визначено вплив їх геометричних параметрів на кавітаційно-ерозійні якості досліджуваного ступеня. Запропоновано фізичну модель течії у каналах шнекововідцентрового ступеня з надроторними елементами на режимі недовантаження. Основним змістом роботи є отримання експериментальним шляхом оптимальних геометричних параметрів надроторних елементів для поліпшення кавітаційно-ерозійної характеристики досліджуваного шнекововідцентрового ступеня та розроблення рекомендацій до проектування надроторних елементів у складі шнекововідцентрового ступеня.
The thesis has solved an actual scientific and technical problem – improvement of cavitation and erosion characteristics of inducer centrifugal stage using an inducer bush. The study results of operation of the inducer centrifugal stage assembled with inducer bush are presented, as well as the influence of its geometric parameters on the cavitation erosion characteristics of the centrifugal stage being studied is determined. The physical model of liquid flowing through channels of the inducer centrifugal stage assembled with inducer bush during operation at low flow rate is proposed. The main point of the thesis is to obtain experimentally optimal geometric parameters of the inducer bushes for improvement of the cavitation and erosion characteristics of the inducer centrifugal stage and to develop recommendations for the design of inducer bushes assembled with inducer centrifugal stage.
Appears in Collections: Автореферати

Views

Finland Finland
1
Germany Germany
15203726
Greece Greece
1
Ireland Ireland
2117158
Lithuania Lithuania
1
Singapore Singapore
447747264
Ukraine Ukraine
149396660
United Kingdom United Kingdom
65816473
United States United States
895494418
Unknown Country Unknown Country
149396659

Downloads

Germany Germany
1
Ireland Ireland
1
Lithuania Lithuania
1
Ukraine Ukraine
895494418
United Kingdom United Kingdom
1
United States United States
447747264
Unknown Country Unknown Country
38

Files

File Size Format Downloads
avtoref_Tkach.pdf 1,13 MB Adobe PDF 1343241724

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.